WebCHALMERS, Applied Mechanics, Master’s Thesis 2013:02 V Preface This Master thesis was carried out during autumn 2012 at Epsilon as the final part of the Master´s Programme in Applied Mechanics at Chalmers University of Technology. First I would like to thank my supervisors, Jens Weber at Epsilon and Martin WebCHALMERS, Applied Mechanics, Master’s Thesis 2013:50 7 1 Introduction This chapter describes the background to the problem and motivationthe to perform this thesis work. It contains background, objectives and limitations of the problem. The thesis work was carried out in cooperation with Vicura AB, which is an
Traffic safety of Heavy Goods Vehicles and implications for High ...
WebCHALMERS, Applied Mechanics, Master’s Thesis 2016:72 7 1 Introduction 1.1 Background The effort required in vehicle testing and measurement increases along the complexities of the vehicle system and the necessary testing conditions. The increasing competitive automotive market is forcing the manufacturers and the WebCHALMERS, Applied Mechanics, Master’s Thesis 2016:72 7 1 Introduction 1.1 Background The effort required in vehicle testing and measurement increases along the … statutory services construction
PhD student position in sustainable antifouling strategies
WebCHALMERS, Applied Mechanics, Master’s Thesis 2015:071 1 Introduction 1.1 Background The engine bay and exhaust system of modern day vehicles consists of components made out of different materials with different thermal conductivities. WebCHALMERS, Applied Mechanics, Master’s Thesis 2012:14 VII Preface In this study an online simulation of charge pressure has been developed, during the spring of 2012. The project is a master thesis work done by Adam Johannesson and Jacob Heimersson. Examiner has been Associate Professor Sven Andersson at the WebCHALMERS, Applied Mechanics, Master’s Thesis 2011:08 3 2 Method of approach The first phase in the project was to gather information, about offshore wind power, to build up a foundation of understanding before starting the modelling. After that the searching for input data to the model started. This was the first big obstacle during the statutory services